775 Spindle Motor DC 12–24V, 20000 RPM

$37.80

The 775 DC motor is a high-speed, high-torque brushed DC motor featuring dual ball bearings for stability and long life.
It is used widely as a spindle motor in CNC engraving machines (like CNC 3018), drill presses, cutting tools, and DIY robotics.

$37.80

The 775 Spindle Motor DC 12–24V, 20000 RPM is a high-speed, high-torque brushed DC motor featuring dual ball bearings for stability and long life.
It is used widely as a spindle motor in CNC engraving machines (like CNC 3018), drill presses, cutting tools, and DIY robotics.

The model name “775” refers to its motor size standard:

  • 7 → Motor body diameter ≈ 42–45 mm

  • 75 → Motor length ≈ 75 mm

This type of motor provides a great balance between torque, speed, and durability, making it ideal for light-duty machining or mechanical projects.

Key Features

Feature Description
Motor Type Brushed DC Motor
Rated Voltage 12 V – 24 V DC
Rated Speed Up to 20,000 RPM @ 24 V
Shaft Type Round or threaded output shaft (commonly 5 mm or 6 mm diameter)
Bearings Dual Ball Bearings for smooth and quiet rotation
Cooling Built-in fan or ventilation holes for air cooling
Torque Output High torque suitable for cutting and engraving
Mount Type Front flange or clamp mount
Direction Reversible (by swapping polarity)
Durability Long lifespan under proper cooling and load
Usage Continuous-duty spindle motor for light CNC and DIY applications

Typical Specifications

Parameter Typical Value
Model 775 Spindle Motor
Voltage Range 12 – 24 V DC
No-Load Speed 12 V → ~10,000 RPM
24 V → ~20,000 RPM
No-Load Current 0.6 – 1 A
Rated Current 2 – 5 A (continuous)
Stall Current 10 – 15 A (short-term)
Rated Power Output ~150 – 200 W
Torque (Rated) ~0.6 kg·cm (no-load), up to 1.2 kg·cm peak
Shaft Diameter 5 mm (round) or 6 mm (optional)
Motor Body Diameter ~42 mm
Motor Length ~66–75 mm
Weight ~370 – 400 g
Bearing Type Dual Ball Bearing
Cooling Type Ventilated / Fan Cooled
Rotation Direction CW/CCW reversible

Performance Overview

Voltage No-load RPM Rated Current Power Output Comment
12 V ~10,000 RPM 2 A ~80 W Moderate torque, quiet operation
18 V ~15,000 RPM 3.5 A ~130 W Balanced performance
24 V ~20,000 RPM 4.5 A ~180–200 W Maximum rated power

 Running above 24 V can overheat the brushes and commutator.
Ideal operating range: 18–24 V DC for CNC spindles.

Applications

  • CNC 3018 engraver spindle motor (wood, PCB, plastic, acrylic)

  • Mini drill press or polishing tool

  • DIY lathe or grinding machine

  • Wood carving, cutting, sanding, or drilling

  • Robotics / Mechanical prototypes

  • Small belt-driven machines or fans

Tips for Use

  1. Use proper power supply:

    • 24 V DC regulated power supply (≥ 6 A recommended).

    • For CNC use, prefer a DC motor controller or PWM speed control module.

  2. Avoid overheating:

    • Use continuous cooling airflow or a heat sink.

    • Don’t operate at full power for long periods without rest.

  3. Reverse direction:

    • Swap polarity of + and – to change rotation direction.

  4. Mount securely:

    • Use an aluminum motor mount bracket to prevent vibration.

  5. Use soft-start driver or PWM controller:

    • Prevents high inrush current and extends motor life.

  6. Couple carefully:

    • Use flexible couplers or collets when attaching cutting tools to avoid shaft bending.

  7. Protect electronics:

    • Use a flyback diode or snubber circuit if driven by a relay.

  8. Lubrication:

    • Bearings are sealed — no maintenance required, but keep dust out.

Example Setup in CNC 3018

Component Recommended Specification
Spindle Motor 775 DC, 24 V, 200 W
Speed Controller (PWM) 24 V / 6 A DC Motor Controller
Power Supply 24 V / 6–10 A
Spindle Mount 42 mm aluminum clamp
Collet/Chuck ER11 chuck for 5 mm shaft
Cooling Small DC fan or heatsink airflow

Summary Table

Parameter Specification
Model 775 High Power DC Motor
Voltage Range 12 – 24 V DC
Rated Power 150 – 200 W
Speed Up to 20,000 RPM
No-load Current 0.6 – 1 A
Rated Current 2 – 5 A
Shaft Diameter 5 mm
Body Diameter ~42 mm
Length ~70 mm
Bearing Type Dual Ball Bearing
Cooling Air Vent / Fan
Rotation Direction CW / CCW
Applications CNC Spindle, Drill, Engraver, Cutter
Mounting 42 mm clamp mount

Specifications :

Specifiation Typical Value
Model 775 Spindle Motor
Voltage Range 12 – 24 V DC
No-Load Speed 12 V → ~10,000 RPM
24 V → ~20,000 RPM
No-Load Current 0.6 – 1 A
Rated Current 2 – 5 A (continuous)
Stall Current 10 – 15 A (short-term)
Rated Power Output ~150 – 200 W
Torque (Rated) ~0.6 kg·cm (no-load), up to 1.2 kg·cm peak
Shaft Diameter 5 mm (round) or 6 mm (optional)
Motor Body Diameter ~42 mm
Motor Length ~66–75 mm
Weight ~370 – 400 g
Bearing Type Dual Ball Bearing
Cooling Type Ventilated / Fan Cooled
Rotation Direction CW/CCW reversible

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.