2S 18650 Lithium Battery Protection Board (BMS) 7.4V 4.5A

$1.80

The 2S 18650 Lithium Battery Protection Board (BMS) 7.4V 4.5A is a compact and reliable battery management solution designed specifically for two 18650 lithium-ion cells connected in series (2S configuration). This protection board ensures safe charging and discharging by providing over-charge, over-discharge, over-current, and short-circuit protection.

$1.80

The 2S 18650 Lithium Battery Protection Board (BMS) 7.4V 4.5A is a compact and reliable battery management solution designed specifically for two 18650 lithium-ion cells connected in series (2S configuration). This protection board ensures safe charging and discharging by providing over-charge, over-discharge, over-current, and short-circuit protection.

Equipped with high-quality MOSFETs and supplied with nickel strips for easy spot welding, this BMS is ideal for DIY battery packs, portable electronics, robotics, and low-to-medium power energy storage applications.

 Features

  • Comprehensive Battery Protection
    Provides over-charge, over-discharge, over-current, and short-circuit protection for lithium-ion cells.

  • 4.5A Continuous Discharge Current
    Supports stable current output for medium-power applications.

  • Designed for 2S (7.4V) Lithium Battery Packs
    Optimized for two 18650 cells connected in series.

  • High-Efficiency MOSFET Design
    Low internal resistance reduces heat generation and improves efficiency.

  • Compact & Lightweight PCB
    Easy to integrate into small battery packs and enclosed devices.

  • Nickel Strips Included
    Enables secure and low-resistance cell connections via spot welding.

  • Automatic Recovery Protection
    Board automatically resets once fault conditions are removed.

Specifications

Parameter Specification
Battery Configuration 2S (2 × 18650 Li-ion cells in series)
Nominal Voltage 7.4V
Maximum Charge Voltage 8.4V
Continuous Discharge Current 4.5A
Over-Charge Protection Voltage ~4.25 ± 0.05V per cell
Over-Discharge Protection Voltage ~2.5 ± 0.1V per cell
Over-Current Protection Yes
Short-Circuit Protection Yes
Protection IC Integrated lithium battery protection IC
MOSFET Type Dual high-current MOSFET
Operating Temperature –40°C to +85°C
Board Type Non-balancing BMS
Included Accessories Nickel strips

 Applications

The 2S 7.4V 4.5A BMS Protection Board is widely used in:

  • DIY 18650 battery packs

  • Robotics and automation projects

  • RC toys and model vehicles

  • Rechargeable LED lighting systems

  • Portable speakers and audio devices

  • Power banks and backup battery systems

  • Electronics prototypes and educational projects

  • Custom lithium battery assemblies

Installation & Usage Tips

  • Always use matched 18650 cells (same capacity, brand, and age) for best performance.

  • Spot-weld nickel strips instead of soldering directly on batteries to avoid overheating.

  • Ensure correct polarity connections (B+, B-, B1 terminals) before powering the circuit.

  • Use a compatible 8.4V lithium-ion charger for charging.

  • Avoid exceeding the 4.5A discharge limit to prevent MOSFET damage.

  • Secure the BMS inside insulated housing to prevent accidental short circuits.

Maintenance & Safety Tips

  • Periodically check connections for looseness or corrosion.

  • Avoid operating in extremely high temperatures for long durations.

  •  Do not mix old and new batteries in the same pack.

  • Never bypass the protection board—it is essential for battery safety.

  •  If the battery pack frequently disconnects, check for over-current or short-circuit conditions.

Why Choose This 2S 4.5A Battery Protection Board?

  • Reliable protection for lithium-ion battery packs

  • Compact size with high current handling

  • Ideal balance of performance, safety, and cost

  • Perfect for DIY, professional, and educational use

Specifications :

Parameter Specification
Battery Configuration 2S (2 × 18650 Li-ion cells in series)
Nominal Voltage 7.4V
Maximum Charge Voltage 8.4V
Continuous Discharge Current 4.5A
Over-Charge Protection Voltage ~4.25 ± 0.05V per cell
Over-Discharge Protection Voltage ~2.5 ± 0.1V per cell
Over-Current Protection Yes
Short-Circuit Protection Yes
Protection IC Integrated lithium battery protection IC
MOSFET Type Dual high-current MOSFET
Operating Temperature –40°C to +85°C
Board Type Non-balancing BMS
Included Accessories Nickel strips

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.