2S 18650 Lithium Battery Protection Board 7.4V 9A

$2.25

$2.25

The 2S 18650 Lithium Battery Protection Board 7.4V 9A is a high-performance Battery Management System (BMS) designed to protect and manage two-cell (2S) lithium-ion battery packs. It provides comprehensive safety protection against over-charging, over-discharging, over-current, and short circuits, ensuring reliable and long-term battery operation.

This protection board is ideal for 7.4V lithium battery packs built with 18650 Li-ion cells, commonly used in DIY battery packs, portable electronics, robotics, power tools, LED systems, and energy storage projects. With a continuous discharge current of up to 9A, it supports higher-power applications while maintaining safety and stability.

Key Features

  • 2S Battery Protection (7.4V Nominal) – Designed specifically for two 18650 lithium-ion cells connected in series.

  • 9A Continuous Discharge Current – Supports medium-to-high power loads without overheating.

  • Over-Charge Protection – Automatically cuts off charging when voltage exceeds safe limits.

  • Over-Discharge Protection – Prevents deep discharge that can permanently damage cells.

  • Over-Current & Short-Circuit Protection – Instantly disconnects the load during faults to protect batteries and devices.

  • MOSFET-Based Design – Ensures fast response, low power loss, and efficient current handling.

  • Compact & Lightweight PCB – Easy to integrate into custom battery packs.

  • Nickel Strip Welding Pads – Compatible with spot welding for secure battery connections.

  • Improves Battery Lifespan – Reduces stress on cells, extending overall cycle life.

Specifications

  • Battery Configuration: 2S (2 cells in series)

  • Nominal Voltage: 7.4V

  • Maximum Charging Voltage: 8.4V

  • Continuous Discharge Current: 9A

  • Charging Current: Up to 9A (depending on charger and cells)

  • Over-Charge Detection Voltage: ≈ 4.25V ±0.05V per cell

  • Over-Discharge Detection Voltage: ≈ 2.5V ±0.1V per cell

  • Over-Current Protection: Yes

  • Short-Circuit Protection: Yes (automatic cut-off)

  • Protection Type: MOSFET-based BMS

  • Compatible Cell Type: 18650 Li-ion cells

  • Board Type: Battery protection board (non-balancing)

  • Operating Temperature: –20°C to +60°C

 Applications

The 2S 7.4V 9A Lithium Battery Protection Board is widely used in:

  • DIY 18650 battery packs

  • Portable electronic devices

  • Robotics and Arduino / ESP32 projects

  • LED lighting systems and portable lamps

  • Power tools and handheld devices

  • Bluetooth speakers and audio systems

  • RC models and hobby electronics

  • Backup power and small energy storage systems

Its 9A capacity makes it suitable for applications that require higher current than standard 2A–6A BMS boards.

 Installation & Usage Tips

  • Always use matched 18650 cells (same capacity, brand, and age) for best performance.

  • Ensure correct polarity when connecting B+, B–, B1, P+, and P– terminals.

  • Use spot welding instead of soldering directly to battery cells to avoid heat damage.

  • Do not exceed the 9A continuous discharge limit to prevent overheating.

  • Pair with a proper 8.4V lithium battery charger designed for 2S packs.

  • Provide adequate ventilation if used in high-current applications.

Maintenance & Safety Tips

  • Periodically check battery voltage balance and pack condition.

  • Avoid exposure to water, moisture, or extreme heat.

  • Do not bypass or remove the protection board—it is critical for safety.

  • Replace the BMS if it shows signs of physical damage or overheating.

  • Store battery packs at partial charge (≈40–60%) when not in use for long periods.

Why Choose This 2S 7.4V 9A BMS?

  • Reliable protection for high-current lithium battery packs

  • Compact design suitable for tight installations

  • Essential safety layer for DIY and professional electronics

  • Extends battery life and prevents costly failures

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.