-
- Capacitance: 10 μF (microfarads). This dictates how much electrical charge the component can hold.
- Maximum Voltage: 25 V (Volts). This is the highest continuous voltage the component can safely handle.
- Common Physical Formats:
-
- Radial Through-Hole: Usually measures 4x7mm or 5x11mm, featuring longer wire leads for circuit board installation.
- SMD (Surface Mount): Measures 4×5.4mm (Package 0405) or Type A/B, designed to solder flat onto surface layouts.
-
- Polarity: Standard versions are polarized. The longer lead indicates the positive side, and a distinct negative stripe runs down the body. Bi-polar/non-polar versions exist explicitly for audio applications.
- Filtering Noise: Smoothing ripples out of raw DC power feeds.
- Decoupling: Isolating different circuit blocks to prevent power dips from affecting logic chips.
- Repairs: Fixing consumer hardware like televisions, monitors, game consoles, and computer power rails
Specifications
- Capacitance: 10 µF (microfarads)
- Voltage rating: 25 V DC (maximum working voltage)
Common uses
- Power supply filtering and smoothing
- Signal coupling and decoupling
- Timing circuits
- Audio amplifier circuits
- Microcontroller projects (such as Arduino and ESP32)
Important notes
- If it is an electrolytic capacitor, it is polarized:
- Long lead = Positive (+)
- Short lead/striped side = Negative (−)
- Never use it in a circuit where the voltage exceeds 25 V.
- You can replace it with a capacitor of the same capacitance (10 µF) but with a higher voltage rating (e.g., 35 V, 50 V). Do not replace it with one that has a lower voltage rating.




There are no reviews yet.