The 2S 18650 Lithium Battery Protection Board (7.4V 2A) is a compact Battery Management System (BMS) designed to protect two 18650 lithium-ion cells connected in series (2S). It provides essential safety functions such as over-charge protection, over-discharge protection, over-current protection, and short-circuit protection, ensuring safe, stable, and long-lasting battery operation.
This protection board is widely used in DIY battery packs, portable electronics, robotics, power banks, LED systems, and small energy storage projects, making it an essential component for lithium battery safety.
Key Features
-
Comprehensive Battery Protection
Protects lithium cells from over-charging, over-discharging, over-current, and short-circuit conditions. -
Designed for 2S Lithium Packs
Supports two 18650 Li-ion cells in series, with a nominal voltage of 7.4V and full charge voltage of 8.4V. -
Stable 2A Continuous Current
Suitable for low-to-medium power applications requiring up to 2A discharge current. -
Automatic Protection & Recovery
Automatically disconnects load or charger during fault conditions and restores operation once conditions return to normal. -
Compact & Lightweight Design
Small PCB size makes it ideal for space-constrained battery enclosures. -
Easy Soldering Pads
Clearly labeled pads for battery connection (B+, B1, B-) and load/charging terminals (P+, P-).
Technical Specifications
| Parameter | Specification |
|---|---|
| Battery Configuration | 2S (2 × 18650 cells in series) |
| Nominal Voltage | 7.4V |
| Maximum Charge Voltage | 8.4V |
| Continuous Discharge Current | 2A |
| Over-Charge Protection Voltage | ~4.25V ± 0.05V per cell |
| Over-Discharge Protection Voltage | ~2.5V ± 0.1V per cell |
| Over-Current Protection | Yes |
| Short-Circuit Protection | Yes |
| Balance Function | No (non-balancing BMS) |
| Cell Type | Lithium-ion (Li-ion) |
| Operating Temperature | –20°C to +60°C |
| PCB Size | Compact / Mini size |
Applications
This 2S 7.4V lithium battery protection board is ideal for:
-
DIY 18650 battery packs
-
Robotics & Arduino projects
-
Rechargeable LED lights
-
Portable power supplies
-
Small electronic devices
-
RC toys & small electric models
-
Backup battery systems
Installation Guidelines
-
Connect battery cells correctly
-
B- → Negative of cell 1
-
B1 → Connection between cell 1 & cell 2
-
B+ → Positive of cell 2
-
-
Connect load & charger
-
P+ and P- are shared for both charging and discharging.
-
-
Double-check polarity
Incorrect wiring may permanently damage the BMS. -
Use matched cells
Always use same capacity, brand, and age 18650 cells for safety and performance.
Maintenance & Safety Tips
-
Use high-quality 18650 cells from trusted manufacturers.
-
Periodically check cell voltages since this board does not include balancing.
-
Avoid overheating; ensure good ventilation in battery enclosure.
-
Use a proper 8.4V lithium charger designed for 2S battery packs.
-
Do not exceed 2A continuous current to prevent MOSFET damage.
-
Keep the board away from moisture and conductive debris.
Advantages
Increases battery lifespan
Prevents dangerous battery conditions
Simple and cost-effective safety solution
Ideal for beginners and professionals
Essential protection for lithium battery packs




There are no reviews yet.