The 2S 18650 Lithium Battery Protection Board 7.4V 3A is a compact and reliable Battery Management System (BMS) designed to protect two 18650 lithium-ion cells connected in series (2S configuration). It ensures safe charging, discharging, and long-term battery performance by providing overcharge, over-discharge, over-current, and short-circuit protection.
This protection board is widely used in DIY battery packs, portable electronics, robotics, backup power systems, and low-power energy storage applications, where safety and stability are critical.
Key Features
-
Complete Battery Protection
-
Over-charge protection
-
Over-discharge protection
-
Over-current protection
-
Short-circuit protection
-
-
3A Continuous Discharge Current
-
Suitable for low-to-medium power applications
-
-
2S (7.4V) Lithium Battery Support
-
Designed for two 18650 Li-ion cells in series
-
-
MOSFET-Based Protection Circuit
-
Fast response and low internal resistance
-
-
Compact & Lightweight Design
-
Easy integration into small battery packs
-
-
Nickel Strip / Spot Welding Compatible
-
Ideal for DIY and professional battery assembly
-
Specifications
| Parameter | Description |
|---|---|
| Battery Configuration | 2S (2 × 18650 cells in series) |
| Nominal Voltage | 7.4V |
| Maximum Charge Voltage | 8.4V |
| Continuous Discharge Current | 3A |
| Charge Current | ≤ 3A |
| Over-charge Protection Voltage | ~4.25V ±0.05V per cell |
| Over-discharge Protection Voltage | ~2.5V ±0.1V per cell |
| Over-current Protection | Yes |
| Short-circuit Protection | Yes |
| Protection Type | MOSFET-based BMS |
| Battery Type | Lithium-ion / Lithium-polymer (18650) |
| Board Type | Non-balancing protection board |
| Operating Temperature | –20 °C to +60 °C |
| Application Power Level | Low to medium power |
Applications
The 2S 7.4V 3A Lithium Battery Protection Board is ideal for:
-
DIY 18650 battery packs
-
Robotics and small automation projects
-
Rechargeable LED lights and flashlights
-
Portable electronic devices
-
Handheld gadgets and tools
-
IoT devices and embedded systems
-
Backup power modules
-
Educational and prototyping projects
Why Use a Battery Protection Board?
Lithium-ion batteries are powerful but sensitive. Without a protection board, they can:
-
Overcharge and overheat
-
Deep-discharge and lose capacity
-
Short-circuit and become dangerous
This 2S BMS board prevents these risks and extends battery lifespan, making it essential for any safe lithium battery pack design.
Installation & Connection Tips
-
Always use matched 18650 cells (same capacity, brand, and age).
-
Connect cells in series before wiring the BMS.
-
Follow the B+ / B– / B1 / P+ / P– markings carefully.
-
Use spot welding or nickel strips instead of soldering directly on batteries (for safety).
-
Ensure proper insulation to avoid accidental short circuits.
Maintenance & Safety Tips
-
Periodically inspect battery pack connections.
-
Avoid operating in extreme heat environments.
-
Use a proper 8.4V lithium charger designed for 2S packs.
-
Do not exceed the 3A current limit to avoid damaging the board.
-
Test voltage levels occasionally to ensure normal operation.
Important Notes
-
This is a protection board only, not a charger.
-
It does not include active cell balancing.
-
Not recommended for high-current loads like motors above 3A.








There are no reviews yet.