The 2S 18650 Lithium Battery Protection Board 7.4V 9A is a high-performance Battery Management System (BMS) designed to protect and manage two-cell (2S) lithium-ion battery packs. It provides comprehensive safety protection against over-charging, over-discharging, over-current, and short circuits, ensuring reliable and long-term battery operation.
This protection board is ideal for 7.4V lithium battery packs built with 18650 Li-ion cells, commonly used in DIY battery packs, portable electronics, robotics, power tools, LED systems, and energy storage projects. With a continuous discharge current of up to 9A, it supports higher-power applications while maintaining safety and stability.
Key Features
-
2S Battery Protection (7.4V Nominal) – Designed specifically for two 18650 lithium-ion cells connected in series.
-
9A Continuous Discharge Current – Supports medium-to-high power loads without overheating.
-
Over-Charge Protection – Automatically cuts off charging when voltage exceeds safe limits.
-
Over-Discharge Protection – Prevents deep discharge that can permanently damage cells.
-
Over-Current & Short-Circuit Protection – Instantly disconnects the load during faults to protect batteries and devices.
-
MOSFET-Based Design – Ensures fast response, low power loss, and efficient current handling.
-
Compact & Lightweight PCB – Easy to integrate into custom battery packs.
-
Nickel Strip Welding Pads – Compatible with spot welding for secure battery connections.
-
Improves Battery Lifespan – Reduces stress on cells, extending overall cycle life.
Specifications
-
Battery Configuration: 2S (2 cells in series)
-
Nominal Voltage: 7.4V
-
Maximum Charging Voltage: 8.4V
-
Continuous Discharge Current: 9A
-
Charging Current: Up to 9A (depending on charger and cells)
-
Over-Charge Detection Voltage: ≈ 4.25V ±0.05V per cell
-
Over-Discharge Detection Voltage: ≈ 2.5V ±0.1V per cell
-
Over-Current Protection: Yes
-
Short-Circuit Protection: Yes (automatic cut-off)
-
Protection Type: MOSFET-based BMS
-
Compatible Cell Type: 18650 Li-ion cells
-
Board Type: Battery protection board (non-balancing)
-
Operating Temperature: –20°C to +60°C
Applications
The 2S 7.4V 9A Lithium Battery Protection Board is widely used in:
-
DIY 18650 battery packs
-
Portable electronic devices
-
Robotics and Arduino / ESP32 projects
-
LED lighting systems and portable lamps
-
Power tools and handheld devices
-
Bluetooth speakers and audio systems
-
RC models and hobby electronics
-
Backup power and small energy storage systems
Its 9A capacity makes it suitable for applications that require higher current than standard 2A–6A BMS boards.
Installation & Usage Tips
-
Always use matched 18650 cells (same capacity, brand, and age) for best performance.
-
Ensure correct polarity when connecting B+, B–, B1, P+, and P– terminals.
-
Use spot welding instead of soldering directly to battery cells to avoid heat damage.
-
Do not exceed the 9A continuous discharge limit to prevent overheating.
-
Pair with a proper 8.4V lithium battery charger designed for 2S packs.
-
Provide adequate ventilation if used in high-current applications.
Maintenance & Safety Tips
-
Periodically check battery voltage balance and pack condition.
-
Avoid exposure to water, moisture, or extreme heat.
-
Do not bypass or remove the protection board—it is critical for safety.
-
Replace the BMS if it shows signs of physical damage or overheating.
-
Store battery packs at partial charge (≈40–60%) when not in use for long periods.
Why Choose This 2S 7.4V 9A BMS?
-
Reliable protection for high-current lithium battery packs
-
Compact design suitable for tight installations
-
Essential safety layer for DIY and professional electronics
-
Extends battery life and prevents costly failures





There are no reviews yet.