The 2S 18650 Lithium Battery Protection Board 7.5A is a high-reliability Battery Management System (BMS) designed to protect two-cell (2S) 18650 lithium-ion battery packs with a nominal voltage of 7.4V. This compact protection board integrates high-quality MOSFETs and precise control circuitry to provide over-charge, over-discharge, over-current, and short-circuit protection, ensuring safe and stable battery operation.
With a 7.5A continuous discharge capacity, this BMS is ideal for medium-power applications such as portable electronics, DIY battery packs, robotics, LED systems, and small energy storage solutions. The inclusion of dot-weldable nickel strip pads makes it especially suitable for battery pack assembly and professional manufacturing.
Features
-
2S lithium battery protection for 18650 cells (7.4V nominal)
-
7.5A continuous discharge current, suitable for moderate-power loads
-
High-efficiency MOSFETs for low heat generation and stable performance
-
Comprehensive protection functions:
-
Over-charge protection
-
Over-discharge protection
-
Over-current protection
-
Short-circuit protection
-
-
Dot nickel strip pads for easy spot welding and secure battery connections
-
Compact and lightweight design, ideal for space-constrained projects
-
Improves battery lifespan, safety, and reliability
-
Designed for DIY, industrial, and commercial battery packs
Specifications
| Parameter | Description |
|---|---|
| Battery Configuration | 2S (2 × 18650 Li-ion cells) |
| Nominal Voltage | 7.4V |
| Maximum Charging Voltage | 8.4V |
| Continuous Discharge Current | 7.5A |
| Charge Current | Up to 3–4A (recommended, depends on charger) |
| Protection Type | Over-charge, over-discharge, over-current, short-circuit |
| Control Device | Integrated MOSFETs |
| Connection Type | Solder pads / nickel strip welding points |
| Battery Type | Lithium-ion 18650 cells |
| Board Size | Compact, low-profile design |
| Application Category | Battery packs, portable power systems |
Applications
The 2S 7.5A BMS protection board is widely used in:
-
DIY 18650 battery packs
-
Portable electronic devices
-
Robotics and smart devices
-
LED lighting systems
-
Small DC motors and controllers
-
Power banks and backup power modules
-
Educational and research projects
-
Consumer electronics and IoT devices
Its stable current handling and compact size make it a reliable choice for both hobbyists and professional engineers.
Installation & Usage Tips
-
Always use matched 18650 cells (same capacity, brand, and health) for best performance.
-
Ensure correct polarity when connecting B+, B–, B1, P+, and P– terminals.
-
Use spot welding with nickel strips for secure and low-resistance battery connections.
-
Avoid exceeding the 7.5A discharge limit to prevent overheating or protection triggering.
-
Pair with a proper 8.4V lithium battery charger designed for 2S packs.
-
Provide adequate ventilation in enclosed battery cases.
Maintenance & Safety Guidelines
-
Periodically inspect the board for loose connections or corrosion.
-
Do not expose the BMS to water, moisture, or conductive dust.
-
Avoid physical damage, bending, or shorting the board terminals.
-
If protection triggers frequently, check for overload, short circuits, or unbalanced cells.
-
Store battery packs in a cool, dry environment when not in use.
Why Choose This 2S 7.5A Protection Board?
-
Enhances battery safety and reliability
-
Extends the service life of lithium battery packs
-
Suitable for medium-current applications
-
Easy to integrate into custom and commercial designs
-
Cost-effective solution for safe lithium battery management






There are no reviews yet.