The 2S 18650 Lithium Battery Protection Board (BMS) 7.4V 4.5A is a compact and reliable battery management solution designed specifically for two 18650 lithium-ion cells connected in series (2S configuration). This protection board ensures safe charging and discharging by providing over-charge, over-discharge, over-current, and short-circuit protection.
Equipped with high-quality MOSFETs and supplied with nickel strips for easy spot welding, this BMS is ideal for DIY battery packs, portable electronics, robotics, and low-to-medium power energy storage applications.
 Features
-
Comprehensive Battery Protection
Provides over-charge, over-discharge, over-current, and short-circuit protection for lithium-ion cells. -
4.5A Continuous Discharge Current
Supports stable current output for medium-power applications. -
Designed for 2S (7.4V) Lithium Battery Packs
Optimized for two 18650 cells connected in series. -
High-Efficiency MOSFET Design
Low internal resistance reduces heat generation and improves efficiency. -
Compact & Lightweight PCB
Easy to integrate into small battery packs and enclosed devices. -
Nickel Strips Included
Enables secure and low-resistance cell connections via spot welding. -
Automatic Recovery Protection
Board automatically resets once fault conditions are removed.
Specifications
| Parameter | Specification |
|---|---|
| Battery Configuration | 2S (2 × 18650 Li-ion cells in series) |
| Nominal Voltage | 7.4V |
| Maximum Charge Voltage | 8.4V |
| Continuous Discharge Current | 4.5A |
| Over-Charge Protection Voltage | ~4.25 ± 0.05V per cell |
| Over-Discharge Protection Voltage | ~2.5 ± 0.1V per cell |
| Over-Current Protection | Yes |
| Short-Circuit Protection | Yes |
| Protection IC | Integrated lithium battery protection IC |
| MOSFET Type | Dual high-current MOSFET |
| Operating Temperature | –40°C to +85°C |
| Board Type | Non-balancing BMS |
| Included Accessories | Nickel strips |
 Applications
The 2S 7.4V 4.5A BMS Protection Board is widely used in:
-
DIY 18650 battery packs
-
Robotics and automation projects
-
RC toys and model vehicles
-
Rechargeable LED lighting systems
-
Portable speakers and audio devices
-
Power banks and backup battery systems
-
Electronics prototypes and educational projects
-
Custom lithium battery assemblies
Installation & Usage Tips
-
Always use matched 18650 cells (same capacity, brand, and age) for best performance.
-
Spot-weld nickel strips instead of soldering directly on batteries to avoid overheating.
-
Ensure correct polarity connections (B+, B-, B1 terminals) before powering the circuit.
-
Use a compatible 8.4V lithium-ion charger for charging.
-
Avoid exceeding the 4.5A discharge limit to prevent MOSFET damage.
-
Secure the BMS inside insulated housing to prevent accidental short circuits.
Maintenance & Safety Tips
-
Periodically check connections for looseness or corrosion.
-
Avoid operating in extremely high temperatures for long durations.
-
 Do not mix old and new batteries in the same pack.
-
Never bypass the protection board—it is essential for battery safety.
-
 If the battery pack frequently disconnects, check for over-current or short-circuit conditions.
Why Choose This 2S 4.5A Battery Protection Board?
-
Reliable protection for lithium-ion battery packs
-
Compact size with high current handling
-
Ideal balance of performance, safety, and cost
-
Perfect for DIY, professional, and educational use






There are no reviews yet.