The 775 Spindle Motor DC 12–24V, 20000 RPM is a high-speed, high-torque brushed DC motor featuring dual ball bearings for stability and long life.
It is used widely as a spindle motor in CNC engraving machines (like CNC 3018), drill presses, cutting tools, and DIY robotics.
The model name “775” refers to its motor size standard:
-
7 → Motor body diameter ≈ 42–45 mm
-
75 → Motor length ≈ 75 mm
This type of motor provides a great balance between torque, speed, and durability, making it ideal for light-duty machining or mechanical projects.
Key Features
| Feature | Description |
|---|---|
| Motor Type | Brushed DC Motor |
| Rated Voltage | 12 V – 24 V DC |
| Rated Speed | Up to 20,000 RPM @ 24 V |
| Shaft Type | Round or threaded output shaft (commonly 5 mm or 6 mm diameter) |
| Bearings | Dual Ball Bearings for smooth and quiet rotation |
| Cooling | Built-in fan or ventilation holes for air cooling |
| Torque Output | High torque suitable for cutting and engraving |
| Mount Type | Front flange or clamp mount |
| Direction | Reversible (by swapping polarity) |
| Durability | Long lifespan under proper cooling and load |
| Usage | Continuous-duty spindle motor for light CNC and DIY applications |
Typical Specifications
| Parameter | Typical Value |
|---|---|
| Model | 775 Spindle Motor |
| Voltage Range | 12 – 24 V DC |
| No-Load Speed | 12 V → ~10,000 RPM 24 V → ~20,000 RPM |
| No-Load Current | 0.6 – 1 A |
| Rated Current | 2 – 5 A (continuous) |
| Stall Current | 10 – 15 A (short-term) |
| Rated Power Output | ~150 – 200 W |
| Torque (Rated) | ~0.6 kg·cm (no-load), up to 1.2 kg·cm peak |
| Shaft Diameter | 5 mm (round) or 6 mm (optional) |
| Motor Body Diameter | ~42 mm |
| Motor Length | ~66–75 mm |
| Weight | ~370 – 400 g |
| Bearing Type | Dual Ball Bearing |
| Cooling Type | Ventilated / Fan Cooled |
| Rotation Direction | CW/CCW reversible |
Performance Overview
| Voltage | No-load RPM | Rated Current | Power Output | Comment |
|---|---|---|---|---|
| 12 V | ~10,000 RPM | 2 A | ~80 W | Moderate torque, quiet operation |
| 18 V | ~15,000 RPM | 3.5 A | ~130 W | Balanced performance |
| 24 V | ~20,000 RPM | 4.5 A | ~180–200 W | Maximum rated power |
Running above 24 V can overheat the brushes and commutator.
Ideal operating range: 18–24 V DC for CNC spindles.
Applications
-
CNC 3018 engraver spindle motor (wood, PCB, plastic, acrylic)
-
Mini drill press or polishing tool
-
DIY lathe or grinding machine
-
Wood carving, cutting, sanding, or drilling
-
Robotics / Mechanical prototypes
-
Small belt-driven machines or fans
Tips for Use
-
Use proper power supply:
-
24 V DC regulated power supply (≥ 6 A recommended).
-
For CNC use, prefer a DC motor controller or PWM speed control module.
-
-
Avoid overheating:
-
Use continuous cooling airflow or a heat sink.
-
Don’t operate at full power for long periods without rest.
-
-
Reverse direction:
-
Swap polarity of + and – to change rotation direction.
-
-
Mount securely:
-
Use an aluminum motor mount bracket to prevent vibration.
-
-
Use soft-start driver or PWM controller:
-
Prevents high inrush current and extends motor life.
-
-
Couple carefully:
-
Use flexible couplers or collets when attaching cutting tools to avoid shaft bending.
-
-
Protect electronics:
-
Use a flyback diode or snubber circuit if driven by a relay.
-
-
Lubrication:
-
Bearings are sealed — no maintenance required, but keep dust out.
-
Example Setup in CNC 3018
| Component | Recommended Specification |
|---|---|
| Spindle Motor | 775 DC, 24 V, 200 W |
| Speed Controller (PWM) | 24 V / 6 A DC Motor Controller |
| Power Supply | 24 V / 6–10 A |
| Spindle Mount | 42 mm aluminum clamp |
| Collet/Chuck | ER11 chuck for 5 mm shaft |
| Cooling | Small DC fan or heatsink airflow |
Summary Table
| Parameter | Specification |
|---|---|
| Model | 775 High Power DC Motor |
| Voltage Range | 12 – 24 V DC |
| Rated Power | 150 – 200 W |
| Speed | Up to 20,000 RPM |
| No-load Current | 0.6 – 1 A |
| Rated Current | 2 – 5 A |
| Shaft Diameter | 5 mm |
| Body Diameter | ~42 mm |
| Length | ~70 mm |
| Bearing Type | Dual Ball Bearing |
| Cooling | Air Vent / Fan |
| Rotation Direction | CW / CCW |
| Applications | CNC Spindle, Drill, Engraver, Cutter |
| Mounting | 42 mm clamp mount |









There are no reviews yet.