DN25 AC220V (1-inch) 2W normally closed electric solenoid valve

$50.99

The DN25 1-inch 2W Normally Closed Direct Acting Diaphragm Solenoid Valve (AC 220V) is a robust and reliable solution for automated fluid control. It is ideal for water, air, and light oil applications, especially where safety and automation are required.

$50.99

The DN25 (1-inch) 2W normally closed electric solenoid valve is an electrically controlled fluid control valve used to start or stop the flow of liquids or gases.
It operates using AC 220V power and opens or closes when the internal solenoid coil is energized or de-energized.

Because it is normally closed (NC), the valve remains closed when no power is applied and opens automatically when power is supplied.

 Features

  • Normally Closed (NC) – safe default (flow stops when power is off)

  • Two-Way (2W) – one inlet and one outlet

  • Direct Acting – does not require pressure difference to operate

  • Diaphragm Type – smooth flow control and good sealing

  • 1 Inch (DN25) Port Size

  • AC 220V Coil

  • Fast response time

  • Reliable and durable construction

Working Principle

  1. Power OFF (No Voltage Applied)

    • Solenoid coil is not energized

    • Internal spring keeps the diaphragm closed

    • No fluid passes through the valve

  2. Power ON (AC 220V Applied)

    • Solenoid coil is energized

    • Magnetic force lifts the plunger

    • Diaphragm opens

    • Fluid flows through the valve

When power is removed, the valve automatically closes again.

Specifications

Parameter Value
Valve Type Solenoid Valve
Operation Direct Acting
Control Type 2-Way (On/Off)
Default State Normally Closed (NC)
Port Size 1 Inch (DN25)
Voltage AC 220V
Power Consumption ~10–25W (varies by model)
Body Material Brass / Stainless Steel (model dependent)
Seal Material NBR / EPDM / Viton
Medium Water, air, light oil
Operating Pressure 0 – 0.8 MPa (varies)
Temperature Range -5°C to 80°C (typical)
Response Time <1 second

Applications

  • Water supply systems

  • Automatic irrigation

  • Poultry & livestock watering systems

  • Industrial automation

  • HVAC systems

  • Fuel and oil control (compatible models)

  • Smart agriculture projects

  • Washing machines and fluid control panels

Electrical Connection

  • Two wires from the solenoid coil

  • Connect directly to AC 220V

  • Polarity does not matter (AC supply)

⚠️ Always use:

  • Proper insulation

  • Circuit breaker or fuse

  • Relay or contactor when controlled by a microcontroller

 Controlling with Arduino / ESP32 (Important)

You CANNOT connect AC 220V directly to Arduino or ESP32.

To control this valve safely:

  • Use a relay module (5V or 3.3V controlled)

  • Or solid state relay (SSR)

  • Or contactor

Basic Control Flow:

Arduino / ESP32 → Relay Module → AC 220V → Solenoid Valve

 Installation Tips

Install in the direction of flow (arrow on valve body)
 Use thread seal tape (PTFE)
 Install a filter before the valve to prevent clogging
 Keep coil dry and protected
 Avoid continuous overheating of the coil

Safety Notes

⚠️ AC 220V is dangerous

  • Always turn off power before wiring

  • Use proper grounding

  • Do not touch live terminals

  • Ensure waterproof protection in wet areas

Advantages

  • Works at zero pressure

  • Simple ON/OFF control

  • Reliable for automation

  • Fail-safe normally closed design

Specifications 

Parameter Value
Valve Type Solenoid Valve
Operation Direct Acting
Control Type 2-Way (On/Off)
Default State Normally Closed (NC)
Port Size 1 Inch (DN25)
Voltage AC 220V
Power Consumption ~10–25W (varies by model)
Body Material Brass / Stainless Steel (model dependent)
Seal Material NBR / EPDM / Viton
Medium Water, air, light oil
Operating Pressure 0 – 0.8 MPa (varies)
Temperature Range -5°C to 80°C (typical)
Response Time <1 second

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Related Products