Double Pole Double Throw (DPDT) electromagnetic relay HK19F-DC12V-SHG

$1.80

The HK19F-DC12V-SHG is part of the HK19F series of Double Pole Double Throw (DPDT) electromagnetic relays. It features 2 open (NO) and 2 closed (NC) contacts, allowing it to control two independent circuits simultaneously.

$1.80

The HK19F-DC12V-SHG is part of the HK19F series of Double Pole Double Throw (DPDT) electromagnetic relays. It features 2 open (NO) and 2 closed (NC) contacts, allowing it to control two independent circuits simultaneously. With a 12V DC coil, it’s commonly used in communication systems, instrumentation, and automation circuits where reliable signal switching is essential.

 Features

  • DPDT Configuration: Offers dual-channel switching with both NO and NC terminals.
  • Low Power Coil: Operates efficiently at 12V DC, suitable for control systems.
  • Compact Design: Small footprint for tight PCB layouts.
  • Reliable Contact Performance: Ensures consistent signal transmission.
  • Wide Operating Temperature: Suitable for harsh environments.

 Specifications

Attribute Details
Model HK19F-DC12V-SHG
Coil Voltage 12V DC
Contact Configuration 2 NO + 2 NC (DPDT)
Contact Rating 2A @ 30V DC / 250V AC
Coil Resistance ~1,200Ω (typical)
Pin Count 8 Pins
Dimensions Approx. 20mm × 10mm × 10mm
Mounting Type Through-hole
Operating Temp Range -40°C to +85°C

Applications

  • Communication Equipment: Used for signal routing and switching.
  • Instrumentation: Controls measurement and monitoring circuits.
  • Automation Systems: Ideal for logic control and relay-based switching.
  • Consumer Electronics: Powers small devices and circuits.
  • Security Systems: Used in alarm and sensor switching.

Tips for Use

  • Pin Configuration:
    • Pins 1 & 8: Coil terminals
    • Pins 2 & 7: Common terminals (C1, C2)
    • Pins 3 & 6: Normally Closed (NC1, NC2)
    • Pins 4 & 5: Normally Open (NO1, NO2)
  • Use a Flyback Diode: Place a diode (e.g., 1N4007) across the coil to suppress voltage spikes.
  • Voltage Matching: Ensure the control voltage is stable at 12V DC to avoid relay chatter or failure.
  • Pre-Testing: Use a multimeter or test circuit to confirm switching behavior before final installation.
  • Mounting: Solder securely and avoid mechanical stress on pins to ensure long-term reliability.

 Specifications

Attribute Details
Model HK19F-DC12V-SHG
Coil Voltage 12V DC
Contact Configuration 2 NO + 2 NC (DPDT)
Contact Rating 2A @ 30V DC / 250V AC
Coil Resistance ~1,200Ω (typical)
Pin Count 8 Pins
Dimensions Approx. 20mm × 10mm × 10mm
Mounting Type Through-hole
Operating Temp Range -40°C to +85°C

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.