ESAD92-02 Diode 20A 200V New original

$1.80

The ESAD92-02 (also marked D92-02) is a high-current fast recovery diode designed for high-frequency and high-power switching applications. With a current rating of 20A and a reverse voltage of 200V, this diode is commonly used in SMPS, inverters, motor drives, and power supply circuits where fast switching and low losses are required.

$1.80

The ESAD92-02 (also marked D92-02) is a high-current fast recovery diode designed for high-frequency and high-power switching applications. With a current rating of 20A and a reverse voltage of 200V, this diode is commonly used in SMPS, inverters, motor drives, and power supply circuits where fast switching and low losses are required.

Its TO-247 package allows efficient heat dissipation, making it suitable for continuous operation under demanding electrical and thermal conditions.

 Key Features

  • Fast recovery time for high-frequency switching

  • High forward current capability (20A)

  • Low reverse recovery losses

  • High surge current capability

  • Rugged TO-247 power package

  • Good thermal performance with heatsink

  • Suitable for continuous and pulsed operation

 Electrical Specifications (Typical)

Parameter Value
Diode Type Fast Recovery Diode
Maximum Repetitive Reverse Voltage (VRRM) 200 V
Average Forward Current (IF(AV)) 20 A
Peak Forward Surge Current (IFSM) ~150–200 A
Forward Voltage Drop (VF) ~0.9 – 1.2 V
Reverse Recovery Time (trr) Fast (typically < 100 ns)
Package TO-247
Mounting Through-hole
Operating Junction Temperature −55°C to +150°C

Pin Configuration 

When facing the front (text side), pins are usually:

  1. Anode

  2. Cathode

  3. Cathode (connected to tab)

The metal tab is electrically connected to the cathode — insulation is required when mounting on a grounded heatsink.

Applications

  • Switch-mode power supplies (SMPS)

  • DC-DC converters

  • Inverter circuits

  • Motor drive freewheeling diode

  • UPS systems

  • Battery chargers

  • Welding machines

  • Solar charge controllers

Why Use a Fast Recovery Diode?

Compared to standard rectifier diodes:

  • Faster turn-off time

  • Lower switching losses

  • Less heat generation at high frequencies

  • Better efficiency in switching circuits

 Installation & Usage Tips

  • Always use a heatsink for currents above a few amps

  • Apply thermal paste between diode and heatsink

  • Ensure correct polarity (anode/cathode)

  • Keep lead lengths short to reduce noise

  • Use insulation pad if heatsink is grounded

  • Avoid exceeding rated voltage and current

 Common Alternatives / Equivalents

  • MUR2020CT

  • RHRP20120

  • STTH2002

  • HFA25PB200

(Always compare voltage, current, and recovery time before replacement.)

Typical Use Example

In an inverter or SMPS, the ESAD92-02 is used as:

  • Output rectifier

  • Freewheeling diode across inductive loads

  • Clamp diode in switching stages

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.