Features:
-
Fixed +9V regulated output
-
High output current (up to 1.5A)
-
Built-in thermal, current, and overload protection
-
Low ripple and noise
-
Easy to use: just add 2 capacitors
-
Available in standard TO-220 package
$0.90
The JRC7809A is a fixed 9V positive linear voltage regulator . It provides a regulated +9V DC output from a higher unregulated input voltage and is widely used in power supplies, microcontroller circuits, audio systems, and general-purpose electronics.
$0.90
Fixed +9V regulated output
High output current (up to 1.5A)
Built-in thermal, current, and overload protection
Low ripple and noise
Easy to use: just add 2 capacitors
Available in standard TO-220 package
| Parameter | Value |
|---|---|
| Output Voltage | +9V (fixed) |
| Input Voltage Range | 11.5V to 35V (recommended) |
| Output Current (max) | 1.0A – 1.5A (with proper heatsink) |
| Dropout Voltage | ~2V (typical) |
| Quiescent Current | ~5 mA |
| Output Voltage Tolerance | ±2% (typical), ±4% (max) |
| Line Regulation | 50 mV (typical) |
| Load Regulation | 100 mV (typical) |
| Thermal Shutdown | Yes |
| Short-Circuit Protection | Yes |
| Package | TO-220 (standard) |
| Operating Temp Range | –20°C to +125°C |
Only logged in customers who have purchased this product may leave a review.
4.7µF used for surge suppressing, transient voltages, filtering out noise at the ~1KHz or less. This specific capacitor is rated for 4.7µF and 25V with a +/- 20% tolerance. … The negative is denoted by a white line down the side of the capacitor with a negative symbol.
4.7µF used for surge suppressing, transient voltages, filtering out noise at the ~1KHz or less. This specific capacitor is rated for 4.7µF and 25V with a +/- 20% tolerance. … The negative is denoted by a white line down the side of the capacitor with a negative symbol.
Size: 12*12*7.3 MM
Cap color: choose between Red, yellow, black, white and blue.
This small button are the ones you often see in all kinds of projects. The buttons on this version are 6mm tall, with the base measuring 6 x 6mm – and are rated for 50 mA of current. This is for a packet of button
There are no reviews yet.