Features:
-
Fixed –18V regulated output
-
Output current up to 1.5A
-
Built-in protections:
-
Thermal shutdown
-
Current limiting
-
Safe operating area (SOA)
-
-
Low ripple and noise
-
Easy to use (minimal external components)
$2.25
The JRC7918A is ideal for use in dual-supply systems, audio circuits, operational amplifier supplies, and analog electronics, where a regulated negative voltage is required. It includes internal current limiting, thermal shutdown, and safe-area protection for reliable and safe operation.
$2.25
Fixed –18V regulated output
Output current up to 1.5A
Built-in protections:
Thermal shutdown
Current limiting
Safe operating area (SOA)
Low ripple and noise
Easy to use (minimal external components)
| Parameter | Value |
|---|---|
| Output Voltage | –18V (fixed) |
| Input Voltage Range | –20.5V to –35V (recommended) |
| Output Current (max) | 1.0A to 1.5A (with heatsink) |
| Dropout Voltage | ~2V (typical) |
| Quiescent Current | ~5 mA |
| Output Voltage Tolerance | ±2% typical, ±4% max |
| Line Regulation | 50 mV (typical) |
| Load Regulation | 100 mV (typical) |
| Thermal Shutdown | Yes |
| Short-Circuit Protection | Yes |
| Package | TO-220 |
| Operating Temperature | –20°C to +125°C |
Only logged in customers who have purchased this product may leave a review.
Variable resistor are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0V and Vcc as the potentiometer is rotated.
Variable resistor are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0V and Vcc as the potentiometer is rotated.
There are no reviews yet.