-21%

OF06ZAT G BSP 3/4″ Precision Liquid Flow Meter Sensor

$26.91 $34.20

The OF06ZAT G 3/4 Inch Water Flow Sensor is a high-precision liquid flow meter designed for measuring the flow rate of various liquids, including water, milk, light oils, diesel, gasoline, and other non-corrosive fluids. It utilizes an oval gear mechanism coupled with a hall-effect sensor to provide accurate flow measurements.

$26.91 $34.20

Features:
1. PA66 body, PA66 nylon gear.
2. Intubation design of inlet and outlet pipe, easy connection and operation;
3. Imported Hall IC from US Honeywell, stable and reliable;
4. Flow Range: 2-55L/min;
5. working voltage:  5-24V(24V input, 23.5V high level output)
6. rated voltage: DC5V;
7. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below
8. Pulse output duty cycle: 50+-10%
9.  Insulation resistance: 100M Ohm and above;
10. Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;
11. -20-60 centigrade;
12. Max Pressure: 1.2Mpa
13. Electrical Strength: AC500V 50Hz.
14. Wire length: regular 15cm/32cm, other length can be tailor made against request.
15. End connection: SM2.54 Plug

Specification :
Thread size :  Male G3/4
Color : Black  color
Flow rate (test by oil high density liquid) : 30-3000L/Hour
Flow Pulse:  F(Hz)=1.2ML/ P  +/-1%
Working Voltage: DC 7V~24V
not less than 5Vdc Working
Load Capacity: =10 mA (DC 5 V)
Operate pressure : <1.2Mpa
Operating  Working  Temperature : -25 Degree centigrade to +70 Degree centigrade
Liquid Temperature: 70
Accuracy : at 30-3000L/hour is  +/-1%, test liquid is diesel.
Working environmental :  , liquid,  light oil, diesel ….
Cable wire :  Red : + IN ,  Black :- GND , Yellow : signal output.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Related Products