The Raspberry Pi Camera 15-Pin is a Flexible Flat Cable (FFC) designed to interface camera modules with Raspberry Pi boards that use different camera connector types.
-
Raspberry Pi 5 uses a 22-pin camera connector (smaller pitch).
-
Raspberry Pi Zero / Zero W / Zero 1.3 and older models use a 15-pin camera connector (larger pitch).
This cable serves as an adapter bridge between those two interfaces, allowing the use of standard Pi Camera Modules (like the V1, V2, or HQ Camera) on boards with the newer connector type.
Key Features
| Feature | Description |
|---|---|
| Cable Type | FFC (Flexible Flat Cable) |
| Connector Types | 15-pin to 22-pin |
| Cable Length | 15 cm |
| Pitch (Pin Spacing) | 1.0 mm (15-pin side) / 0.5 mm (22-pin side) |
| Cable Width | ~10–12 mm |
| Material | Polyimide / PET flexible film |
| Conductor Type | Copper traces laminated between insulation |
| Orientation | Opposite-side contacts (Type B) |
| Compatibility | Raspberry Pi 5, Zero, Zero W, Zero 1.3 |
| Transmission Quality | High-frequency compatible for camera data signals |
| Temperature Range | –20°C to +80°C typical |
Physical Description
-
One end: 15-pin connector (for standard camera modules).
-
Other end: 22-pin smaller connector (for Pi 5 or Pi Zero boards).
-
The cable is flexible and flat, designed for compact routing in enclosures.
Compatibility Overview
| Raspberry Pi Board | Camera Port Type | Compatible with Cable? | Notes |
|---|---|---|---|
| Raspberry Pi 5 | 22-pin (new CSI/DSI) | Yes | Plug 22-pin side into the board |
| Raspberry Pi Zero / Zero W / Zero 1.3 | 22-pin (smaller CSI) | Yes | Plug 22-pin side into Zero |
| Raspberry Pi 3 / 4 / 3B+ / 2 / 1B+ | 15-pin | Yes | Plug 15-pin side into these models |
| Raspberry Pi HQ Camera | 15-pin camera connector | Works via adapter cable |
This cable does not convert signal types, only adapts pin layout and physical size — both connectors carry the same CSI camera signals (MIPI interface).
Technical Specifications
| Parameter | Typical Value |
|---|---|
| Cable Length | 15 cm |
| Connector 1 | 15-pin FFC (1.0 mm pitch) |
| Connector 2 | 22-pin FFC (0.5 mm pitch) |
| Type | Type B (contacts on opposite sides) |
| Signal Type | MIPI CSI-2 (Camera Serial Interface) |
| Voltage Rating | 30V max |
| Current Rating | 0.5 A per pin max |
| Operating Temperature | –20°C to +80°C |
| Insulation Resistance | ≥ 100 MΩ |
| Conductor Resistance | ≤ 0.1 Ω/cm |
Tips for Use
-
Handle carefully — FFC cables are delicate; avoid bending sharply.
-
Match the connector orientation — blue stiffener side faces away from contacts.
-
Insert gently — lift the camera connector latch before inserting the cable.
-
Power off your Raspberry Pi before connecting or disconnecting.
-
Use correct cable side —
-
22-pin → Raspberry Pi Zero / Pi 5
-
15-pin → Standard camera module
-
-
Avoid twisting — use gentle curves for best signal integrity.
-
Secure cable ends with latches or adhesive pads to prevent disconnection.
Applications
-
Connecting standard Raspberry Pi Camera Module (V1, V2, HQ) to Raspberry Pi 5 or Zero boards
-
Use in DIY camera enclosures, robot vision, security systems, or FPV projects
-
Extending or adapting camera cable routing inside cases or drones
-
Educational and prototyping setups involving CSI camera input
Summary Table
| Parameter | Description |
|---|---|
| Product | Raspberry Pi Camera FFC Cable |
| Type | 15-pin to 22-pin |
| Length | 15 cm |
| Pitch | 1.0 mm ↔ 0.5 mm |
| Material | Flexible PET/Polyimide |
| Connector Orientation | Type B (opposite contacts) |
| Signal Standard | MIPI CSI-2 |
| Compatible Boards | Raspberry Pi 5, Zero, Zero W, Zero 1.3 |
| Compatible Cameras | Pi Camera V1, V2, HQ Camera |
| Use | Connect camera module between differing connector types |







There are no reviews yet.