The TM1616 is a serial input, LED display driver IC with an integrated key-scan interface.
It is manufactured by Titan Micro Electronics and designed for multiplexed LED displays — such as digital meters, home appliances, and control panels.
It’s a member of the TM16xx series (similar to TM1637, TM1620, TM1640, etc.), combining LED driving, display control, and key scanning in a compact SOP-16 package.
The TM1616 simplifies microcontroller interfacing by providing:
-
Built-in current drivers for LEDs
-
Serial communication interface (2-wire or 3-wire)
-
Key matrix scanning capability
Key Features
| Feature | Description |
|---|---|
| Package Type | SOP-16 (Surface Mount) |
| LED Drive Capability | Up to 16 LEDs (8 segments × 2 grids, or similar configuration) |
| Display Modes | 4-segment × 4-digit or 8-segment × 2-digit configurations |
| Drive Method | Dynamic scanning (multiplexed) |
| Interface | Serial data interface (CLK, DIO, STB) |
| Key Scan Support | Up to 8 keys (matrix input) |
| Display Brightness Control | 8-level PWM dimming |
| Supply Voltage (VCC) | 4.0V – 5.5V (typical 5V) |
| Logic Input Voltage | 0 – VCC |
| Current Output per Segment | Up to 20 mA (sink current) |
| Built-in Oscillator | Internal clock generator — no external crystal needed |
| Low Power Mode | Power-saving standby mode |
| Compatibility | Directly compatible with common MCUs (Arduino, STM32, ESP32, etc.) |
Pin Configuration (SOP-16)
| Pin | Name | Description |
|---|---|---|
| 1 | VSS | Ground |
| 2 | SEG1 / KS1 | Segment output 1 / Key scan 1 |
| 3 | SEG2 / KS2 | Segment output 2 / Key scan 2 |
| 4 | SEG3 / KS3 | Segment output 3 / Key scan 3 |
| 5 | SEG4 / KS4 | Segment output 4 / Key scan 4 |
| 6 | GRID1 | Grid (digit) 1 output |
| 7 | GRID2 | Grid (digit) 2 output |
| 8 | STB | Strobe signal (chip select) |
| 9 | CLK | Serial clock input |
| 10 | DIO | Serial data input/output |
| 11 | VDD | Power supply (4.5–5.5V) |
| 12 | SEG5 / KS5 | Segment output 5 / Key scan 5 |
| 13 | SEG6 / KS6 | Segment output 6 / Key scan 6 |
| 14 | SEG7 / KS7 | Segment output 7 / Key scan 7 |
| 15 | SEG8 / KS8 | Segment output 8 / Key scan 8 |
| 16 | NC | No connection / reserved |
Depending on configuration, some pins can be used as either segment outputs or key scan inputs.
Electrical Characteristics
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.0 | 5.0 | 5.5 | V |
| Input High Voltage | VIH | 0.7VDD | – | VDD | V |
| Input Low Voltage | VIL | 0 | – | 0.3VDD | V |
| Segment Output Current | ISEG | – | 10 | 20 | mA |
| Standby Current | ISTB | – | 1 | 10 | µA |
| Operating Temperature | TA | –40 | – | +85 | °C |
Functional Overview
-
Serial Communication: Controlled via 3 pins —
STB,CLK,DIO.-
Data sent serially (similar to TM1637 protocol).
-
-
Display Memory: Internal RAM stores segment data for each digit.
-
Brightness Control: 8-step PWM brightness levels via command setting.
-
Key Scanning: Reads up to 8 switch states using SEG/KS pins as inputs.
Communication Protocol
The TM1616 uses a 3-wire synchronous serial interface:
-
DIO → Data line (bi-directional)
-
CLK → Clock line
-
STB → Strobe (chip select)
Typical data frame:
Commands include:
-
0x40 → Write data to display RAM
-
0x44 → Write data to fixed address
-
0x80–0x8F → Display control (ON/OFF + brightness)
Tips for Use
-
Use current-limiting resistors for each LED segment (unless integrated on board).
-
Keep data wires short to prevent noise at high-speed communication.
-
Ensure proper 5V supply — undervoltage causes dim display or unstable operation.
-
TM1637 libraries (Arduino) can often be modified to work with TM1616 — similar protocol.
-
Use 8-level brightness control to adjust visibility and power usage.
-
Avoid driving high-power LEDs directly — use it only for low-current indicator LEDs or small 7-seg displays.
Applications
-
7-segment or 8×2 LED numeric displays
-
Digital meters (voltage/current/time counters)
-
Home appliances (microwaves, washing machines, ovens)
-
Battery level or temperature indicators
-
DIY clock and timer displays
-
Keypad interface with LED indicators
Summary Table
| Parameter | Description |
|---|---|
| IC Model | TM1616 |
| Package | SOP-16 |
| Supply Voltage | 4.0–5.5 V |
| Interface | Serial (STB, CLK, DIO) |
| LED Drive Channels | 16 (8×2 configuration) |
| Key Scan Inputs | Up to 8 |
| Brightness Levels | 8-step PWM |
| Current Output | Up to 20 mA per segment |
| Operating Temp | –40°C to +85°C |
| Typical Use | LED display & key scan driver |





There are no reviews yet.