A 24V DC Worm Gear Motor combines a DC motor with a worm gearbox to produce very high torque and low rotational speed.
The worm gear design gives it self-locking capability, meaning it cannot be back-driven — an essential feature for mechanisms that must hold position without power (like curtain motors or lift systems).
These motors are compact, efficient, and reversible (change direction by swapping polarity), making them ideal for automation, robotics, and motion control applications.
Key Features
| Feature | Description |
|---|---|
| Motor Type | Brushed DC motor with integrated worm gear reducer |
| Operating Voltage | 24V DC |
| Speed Range | 12 – 470 RPM (depends on gear ratio) |
| Torque Output | 3.4 – 70 kg·cm (varies with model and speed) |
| Self-Locking Function | Yes — worm gear prevents back-driving when power is off |
| Direction Control | Reversible — change polarity of supply to reverse rotation |
| Shaft Type | D-shaft or output flange (varies by model) |
| Body Material | Metal housing (aluminum alloy gearbox) |
| Mounting | M4 or M5 threaded holes on gearbox |
| Noise Level | Low to medium (geared operation) |
| Durability | Long life under moderate load |
| Cooling | Air-cooled (no fan required) |
Typical Specifications
| Parameter | Value |
|---|---|
| Rated Voltage | 24V DC |
| No-Load Speed | 12 RPM – 470 RPM (model-dependent) |
| Rated Torque | 3.4 – 70 kg·cm |
| Rated Current | 0.8 – 3.5 A |
| Stall Current | Up to 8 A |
| Power Output | ~30 – 60 W |
| Rotation Direction | CW/CCW reversible |
| Gear Type | Worm Gear (Self-locking) |
| Gear Ratio Options | 1:50, 1:100, 1:200, etc. |
| Shaft Diameter | 8 – 10 mm (flat/D type) |
| Motor Length | ~90 – 120 mm (depends on torque) |
| Weight | 600 – 900 g |
| Material | Metal gearbox, copper worm gear, steel output shaft |
Performance Overview
| Speed (RPM) | Torque (kg·cm) | Gear Ratio | Application Example |
|---|---|---|---|
| 470 RPM | ~3.4 kg·cm | 1:20 | Small conveyor, fan, roller |
| 200 RPM | ~10 kg·cm | 1:50 | Curtain motor, roller blinds |
| 100 RPM | ~20 kg·cm | 1:100 | Electric lock, vending mechanism |
| 50 RPM | ~35 kg·cm | 1:200 | Small gate, solar tracker |
| 12 RPM | ~70 kg·cm | 1:500 | Lift, heavy door, adjustable furniture |
Self-Locking Function
The worm gear design creates a one-way transmission:
-
The motor can drive the load, but
-
The load cannot drive the motor back.
This means the mechanism stays in place when power is cut — ideal for:
-
Curtains and blinds (stay open/closed)
-
Adjustable beds or lifts
-
Doors and hatches
Tips for Use
-
Polarity Reversal for Direction Control
-
Connect the motor to an H-bridge driver or DPDT relay to easily reverse direction.
-
-
Power Supply
-
Use a 24V DC power source with at least 2× rated current (e.g., 24V/5A).
-
-
Avoid overheating
-
Worm gears generate heat — give the motor ventilation and avoid continuous stall.
-
-
Use Motor Driver
-
For microcontroller control (Arduino, ESP32, etc.), use an L298N, VNH2SP30, or BTS7960 motor driver module.
-
-
Mount Securely
-
Use all gearbox mounting holes; vibration or poor alignment can damage the shaft.
-
-
Protection
-
Add a fuse or current limiter to prevent burnout under stall conditions.
-
-
Speed Control
-
Use a PWM controller or DC motor speed regulator to fine-tune RPM.
-
Typical Wiring Example (Manual Control)
Flipping the DPDT switch reverses polarity and thus the motor’s rotation.
Arduino Example (Using L298N Driver)
This sketch runs the worm gear motor forward for 3 sec, stops, then reverses.
Applications
-
Automatic curtain and blind systems
-
Door and lock actuation mechanisms
-
Lifting or tilting devices
-
Solar panel tracking systems
-
Home automation (smart windows, hatches, etc.)
-
Robotic joints or mobile platforms (high torque)
-
Custom furniture / adjustable equipment
-
Industrial automation or conveyors
Summary Table
| Parameter | Specification |
|---|---|
| Model | 24V DC Worm Gear Motor |
| Speed Range | 12–470 RPM |
| Torque Range | 3.4–70 kg·cm |
| Voltage | 24V DC |
| Self-Locking | Yes |
| Direction | CW/CCW reversible |
| Gear Type | Worm gearbox |
| Power | 30–60 W |
| Shaft Type | D-shaft / round |
| Material | Metal body, copper gear |
| Mounting | Threaded holes |
| Applications | Curtain, lift, door, automation |
| Control Options | DPDT switch / H-bridge / PWM driver |






There are no reviews yet.