The XT60 1 Female to 2 Male Parallel Connector allows a single LiPo battery to supply power to two different loads at the same time.
-
Plug your battery into the female XT60, and then connect two ESCs, chargers, or devices to the two male XT60 outputs.
-
This is useful when you want to run multiple systems (for example, a motor ESC + FPV system) off a single battery pack.
Features
-
Dual output design → one battery powers two devices.
-
High-current XT60 connectors with gold-plated contacts, flame-retardant nylon housing.
-
Heavy-duty silicone wire (12AWG or 14AWG) for low resistance and high current.
-
Plug & play → no soldering, just connect and go.
-
Space-saving → avoids carrying two separate batteries.
-
Durable build → handles high current and frequent plugging.
Specifications
-
Connector type: 1 × XT60 Female → 2 × XT60 Male
-
Wire gauge: 12AWG / 14AWG high-temp silicone
-
Length: 10–20 cm
-
Voltage rating: up to 500V DC (practically: 2S–6S LiPo, 7.4–22.2V)
-
Current rating: ~60A continuous (shared across outputs)
-
Operating temperature: –20°C to +120°C
-
Weight: ~20–30g
Applications
-
RC Drones / Quadcopters → one battery powers both ESC/motors + FPV system.
-
RC Cars / Boats / Airplanes → run motor controller + lights/auxiliary gear.
-
DIY Robotics → split battery supply for motor driver and control board.
-
Field equipment → use one LiPo to run two devices at the same time.
Safety Notes
-
Both outputs share the same battery voltage. Make sure both devices are rated for that voltage.
-
Total current draw is limited by the battery and connector (e.g., a 60A XT60 cannot handle 2×60A devices).
-
Avoid short-circuits → splitting doubles the risk of wiring mistakes.
-
Always check that your battery capacity is enough for both devices.







There are no reviews yet.