In the world of IoT and automation, communication is key. Imagine being able to control devices and receive real-time notifications directly on your phone. Thatโs where the GSM SIM800L Relay Control Shield with Mini Breadboard for Arduino Uno comes in.
The Internet of Things (IoT) has opened new opportunities for makers, entrepreneurs, and tech hustlers. Imagine being able to turn on your home lights, control a water pump, or reset a server โ just by sending an SMS.
This shield combines three essentials in one compact package:
- A SIM800L GSM module (for SMS & calls),
- A Relay module (to switch electrical devices),
- A Mini breadboard (for quick prototyping),
- And on-board power management (to safely power the SIM800L).

All in one Arduino Uno shieldโno messy wiring. Just plug, program, and automate.
This shield is designed for students, engineers, innovators, and hustlers who want to quickly prototype IoT and smart automation projects while keeping costs low.
Hardware Features
- SIM800L GSM Module โ supports SMS, calls, and GPRS.
- Relay (5V, 10A) โ control AC/DC loads such as lights, fans, or pumps.
- Mini Breadboard Area โ add sensors, LEDs, or small circuits without external breadboard.
- On-Board Power Management โ provides stable voltage/current to SIM800L (since itโs sensitive).
- External Antenna Connector โ better GSM reception in low-signal areas.
- Arduino UNO Form Factor โ just plug onto your Uno, no jumper chaos.
In this blog post, weโll dive into how to use this shield to send SMS messages from your Arduino Uno, along with wiring diagrams, sample code, and extra hustler-level hacks to push your project beyond the basics.
Getting Started
Youโll Need:
- Arduino UNO

- Nyereka Tech GSM Relay Shield (with SIM800L)

- Micro SIM card (with SMS balance)
- 12V DC adapter (recommended for stable operation)

- Arduino IDE installed on your computer
Wiring & Setup
Normally, SIM800L requires stable 4V supply and level shifting. But on this shield, power and interfacing are already managed. All you need to:
- Insert your Arduino Uno.
- Plug in a Micro SIM card (with SMS balance): Use Airtel SIM for better.
- Attach an antenna for good reception.
- Power up Arduino Uno (use at least a 2A 12V supply via barrel jack or USB).
Example Arduino Code โ Sending SMS
Hereโs a simple code example to send an SMS message using the SIM800L on the relay shield.
#include <SoftwareSerial.h>
//Create software serial object to communicate with SIM800L
SoftwareSerial mySerial(3, 2); //SIM800L Tx & Rx is connected to Arduino #3 & #2
void setup() {
//Begin serial communication with Arduino and Arduino IDE (Serial Monitor)
Serial.begin(9600);
//Begin serial communication with Arduino and SIM800L
mySerial.begin(9600);
Serial.println("Initializing...");
delay(1000);
mySerial.println("AT"); //Once the handshake test is successful, it will back to OK
updateSerial();
mySerial.println("AT+CMGF=1"); // Configuring TEXT mode
updateSerial();
mySerial.println("AT+CNMI=1,2,0,0,0"); // Decides how newly arrived SMS messages should be handled
updateSerial();
}
void loop() {
updateSerial();
}
void updateSerial() {
delay(500);
while (Serial.available()) {
mySerial.write(Serial.read()); //Forward what Serial received to Software Serial Port
}
while (mySerial.available()) {
Serial.write(mySerial.read()); //Forward what Software Serial received to Serial Port
}
}
How it works:
AT+CMGF=1sets text mode.AT+CMGSstarts SMS to target number.- Message text is sent, followed by
CTRL+Zto send.
Relay Control + SMS
Hereโs a simple sketch to:
- Send SMS confirmation back to the sender.
- Receive SMS with text
ONorOFF. - Control the Relay based on the message.
Example code:
#include <SoftwareSerial.h>
SoftwareSerial sim800(3, 2); // RX, TX
String incomingData = "";
int relayPin = 4;
void setup() {
pinMode(relayPin, OUTPUT);
digitalWrite(relayPin, LOW);
Serial.begin(9600);
sim800.begin(9600);
delay(1000);
Serial.println("Initializing SIM800L...");
sim800.println("AT"); // Test AT command
delay(1000);
sim800.println("AT+CMGF=1"); // Set SMS to text mode
delay(1000);
sim800.println("AT+CNMI=1,2,0,0,0"); // New SMS directly to serial
delay(1000);
}
void loop() {
if (sim800.available()) {
incomingData = sim800.readString();
Serial.println(incomingData);
if (incomingData.indexOf("ON") != -1) {
digitalWrite(relayPin, HIGH);
sendSMS("+2507xxxxxx", "Relay turned ON"); // add your number
}
else if (incomingData.indexOf("OFF") != -1) {
digitalWrite(relayPin, LOW);
sendSMS("+2507xxxxxx", "Relay turned OFF"); // add your number
}
}
}
// -----------------------------
// Send SMS function
// -----------------------------
void sendSMS(String number, String text) {
sim800.println("AT+CMGF=1"); // text mode
delay(1000);
sim800.print("AT+CMGS=\"");
sim800.print(number);
sim800.println("\"");
delay(1000);
sim800.print(text);
delay(1000);
sim800.write(26); // CTRL+Z to send
delay(5000);
}
This way, you can control home appliances, security systems, or irrigation pumps from anywhere with GSM coverage.
Watching video
Tech Hustler Use-Cases
Hereโs how real hustlers can put this shield to work:
- Remote Farming Control ๐ฑ โ Turn on/off water pumps via SMS.
- Home Automation ๐ โ Switch appliances securely without internet.
- Security System ๐ โ Trigger relay to alarm + send SMS when motion detected.
- IoT Prototyping ๐ โ Add sensors on the breadboard and send real-time alerts.
- Tech Startup MVPs ๐ก โ Quickly demo IoT ideas without building power circuits from scratch.
Pro Tips for Hustlers
- Power is King โก: Always use a 5V/2A adapter. SIM800L can spike up to 2A.
- Network Compatibility ๐ถ: Ensure your SIM supports 2G (some carriers phase it out). Recommended to Airtel SIM
- Antenna ๐ก: Without a good antenna, SMS might fail.
- Serial Debugging ๐ฅ๏ธ: Use Arduino Serial Monitor to check AT command responses.
- Scale it up ๐: Add sensors (DHT11, PIR, Gas sensor, etc.) to send smart alerts via SMS.
Why this Matters for African Innovators
In many regions, internet is expensive or unreliable, but GSM networks cover 90%+ of the population. Using GSM-based shields allows innovators to build:
- Low-cost IoT solutions
- Offline automation systems
- Tech that scales in rural areas
This is real tech for real hustlers โ practical, affordable, and impactful.
The GSM SIM800L Relay Control Shield with Mini Breadboard for Arduino Uno is available now at Nyereka Tech
Get it today with student discounts & bulk offers.
Start building automation projects without worrying about messy wiring.
This Shield makes it ridiculously easy to combine SMS + relay control + Arduino in one package. Whether youโre an educator, student, innovator, or entrepreneur, this is your gateway to building real-world IoT automation systems that donโt rely on WiFi or complex cloud setups.





