Charger
Showing 1–48 of 250 results
-
-
-
-
Uncategorized
0.56″ LED 4-Digit Tube 7 segment Display Time Clock
The module is based on a time clock display module, it displays four digital tube (0.56 inches), and driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.
SKU: n/a -
-
-
-
Diodes, Electronic Components, Voltage Regulators
1N5408 Power Diode
Diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above.
SKU: n/a -
Diodes, Electronic Components, Zener Diodes
1W Zener Diode 16V 1N4745
Zener Diode is a silicon semiconductor device that permits current to flow in either a forward or reverse direction. The diode consists of a special, heavily doped p-n junction, designed to conduct in the reverse direction when a certain specified voltage is reached.
SKU: n/a -
Diodes, Electronic Components, Zener Diodes
1W Zener Diode 24V
Zener Diode is a silicon semiconductor device that permits current to flow in either a forward or reverse direction. The diode consists of a special, heavily doped p-n junction, designed to conduct in the reverse direction when a certain specified voltage is reached.
SKU: n/a -
Diodes, Electronic Components, Zener Diodes
1W Zener Diode 3.3V
Zener Diode is a silicon semiconductor device that permits current to flow in either a forward or reverse direction. The diode consists of a special, heavily doped p-n junction, designed to conduct in the reverse direction when a certain specified voltage is reached.
SKU: n/a -
-
-
BJTs (Bipolar Junction Transistors), Electronic Components, Transistors
2N2222A NPN Transistor
2N2222A is a NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. 2N2222A has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 800mA, hence we cannot connect loads that consume more than 800mA using this transistor. To bias a transistor we have to supply current to base pin, this current (IB) should be limited to 5mA.
SKU: n/a








































