-
AgriTech & Smart Farming, Soil and Environment Sensors, Temperature and humidity sensors
STC-1000 110V – 220V AC Digital Temperature Controller
AgriTech & Smart Farming, Soil and Environment Sensors, Temperature and humidity sensorsSTC-1000 110V – 220V AC Digital Temperature Controller
This is STC-1000 110V- 220V AC All Purpose Digital Temperature Controller Thermostat Module. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 99℃.
SKU: n/a
STC-1000 110V – 220V AC Digital Temperature Controller
$7.65
This is STC-1000 110V- 220V AC All Purpose Digital Temperature Controller Thermostat Module. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 99℃.
$7.65
The STC-1000 is a versatile, low-cost, all-in-one digital thermostat used for heating and cooling applications. It has a built-in relay switch and supports both Celsius and Fahrenheit temperature control, making it ideal for aquariums, fermentation chambers, incubators, greenhouses, and more.
Key Features
-
Dual relay output: 1 for heating, 1 for cooling
-
Digital display: Bright red LED for real-time temperature display
-
Adjustable temperature setpoint and hysteresis
-
Calibration function to fine-tune readings
-
Alarm system for over-temperature or sensor errors
-
Simple push-button interface
-
Supports temperature display in °C.
How It Works
-
Set a target temperature (e.g., 25°C).
-
Heating relay turns ON if the temperature drops below the setpoint minus hysteresis.
-
Cooling relay turns ON if the temperature rises above the setpoint plus hysteresis.
-
When the temperature reaches the desired level, the respective output turns OFF.
Wiring Diagram (Basic Setup)
STC-1000 Terminals:
--------------------
1 & 2: Power Input (110–220V AC)
3 & 4: Relay Output for Cooling
5 & 6: Relay Output for Heating
7 & 8: Sensor Probe Input
-
Connect heating/cooling devices to relays via terminals 3–6.
-
Ensure proper AC insulation and load ratings.
Applications
-
Homebrewing / Fermentation chambers
-
Aquariums and fish tanks
-
Incubators
-
Greenhouses
-
DIY fridge/freezer thermostats
-
Temperature-controlled enclosures
-
Reptile or pet enclosures
Safety Tips
-
Always use relays with load ratings matching your devices.
-
Use fuse protection on the AC line.
-
Handle with care; internal parts are live when powered.
How to Use the STC-1000 Temperature Controller
What You Need:
-
STC-1000 unit
-
NTC temperature probe (included)
-
Power supply (110V–220V AC)
-
A heating device (e.g., heater pad, bulb)
-
A cooling device (e.g., fan, compressor)
-
Electrical wires
-
Multimeter (optional but useful for safety checking)
Step-by-Step Installation & Setup
1. Wiring the STC-1000
Here’s how to wire it:
| Terminal | Connection Description |
|---|---|
| 1 & 2 | AC Power Input (110V–220V) |
| 3 & 4 | Cooling Relay Output |
| 5 & 6 | Heating Relay Output |
| 7 & 8 | Sensor Probe |
Example:
-
Connect live and neutral AC mains to terminals 1 & 2.
-
Connect cooling device to terminals 3 & 4.
-
Connect heating device to terminals 5 & 6.
-
Plug the temperature probe into 7 & 8.
Important: Ensure the devices you connect do not exceed 10A at 220V. Use relays or contactors for high-power equipment.
2. Power It On
-
After wiring, plug in the unit.
-
The display will show the current temperature from the sensor.
3. Set the Temperature
To Set the Target Temperature:
-
Press and hold the “S” button for 3 seconds.
-
Use ▲ / ▼ buttons to set your desired temperature.
-
Press “S” again to confirm.
To Set the Hysteresis (Difference to Trigger):
-
Press and hold “S”, then press ▲ once.
-
The screen shows “F1” — this is the temperature hysteresis.
-
Press S again, then use ▲ / ▼ to adjust (default is 2°C).
Optional Settings:
-
F2 = Set upper limit
-
F3 = Set lower limit
-
F4 = Sensor calibration
4. Test It
-
Use a hairdryer or ice to test heating/cooling triggers.
-
The relay click and output indicator light will show when it activates heating or cooling.
Example Use Case: Incubator
-
Set desired temp = 37.5°C
-
Set hysteresis = 0.5°C
-
Heating will activate at 37.0°C, and turn off at 37.5°C
-
Cooling can be disabled (leave terminals 3 & 4 empty) if only heating is required.
Tips
-
Always check wiring twice before powering on.
-
Keep the sensor clean and place it near the center of your controlled space.
-
Mount the controller in a dry, ventilated location.
if you know Kinyarwanda you can lean how to use it in your own language in this Tutorial.
Another way is to follow is to watch this Video.
Specification :
- Temperature measuring range: -50 – 99°C.
- Resolution: 0.1°C.
- Accuracy: ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power supply: 110V- 220VAC±10%, 50/60Hz
- . Power consumption: ≤3W.
- Sensor: NTC sensor (1PC).
- Relay contact capacity: Cool 10A/250VAC; Heat 10A/250VAC.
- Ambient temperature: 0 – 60°C.
- Storage temperature: -30 – 75°C.
- Relative humidity: 20% – 85% (No condensate).
- Front panel size: 75(L) x 34.5(W)(mm)
- Mounting size: 71(L) x 29(W)mm.
- sensor length: 1m (include the probe).
- Product size75(L) x 34.5(W) x 85(D)mm.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related Products
Related products
-
OUT OF STOCK!AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery Equipment
ZL-7918A EGG incubator temperature and humidity controller
AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery EquipmentZL-7918A EGG incubator temperature and humidity controller
0 out of 5(0)ZL-7918A is an intelligent temperature and humidity controller, safe and stable, convenient to operate, applicable for control of incubator, climate chamber, warehouse, and so on.
SKU: n/a
Related products
-
AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery Equipment
STC-3000 Digital Temperature Controller 12v
AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery EquipmentSTC-3000 Digital Temperature Controller 12v
0 out of 5(0)This STC-3000 Temperature Controller includes a NTC 10K sensor and is designed to be used for heating and cooling. It is an excellent and convenient multifunction device for controlling temperature in Aquariums. The two 10 amp switched outputs can be connected to heaters, fans, and cooling system. The controller has a large LED display and easy to program.
SKU: n/a
Related products
-
AgriTech & Smart Farming, Soil and Environment Sensors, Temperature and humidity sensors
DHT11 Temperature and Humidity Sensor
AgriTech & Smart Farming, Soil and Environment Sensors, Temperature and humidity sensorsDHT11 Temperature and Humidity Sensor
0 out of 5(0)DHT11 is a single wire digital humidity and temperature sensor, which provides humidity and temperature values serially with one-wire protocol.
SKU: n/a
Related products
-
AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery Equipment
STC-3000 Digital Temperature Controller 12v
AgriTech & Smart Farming, Egg incubators, Incubators and Hatchery EquipmentSTC-3000 Digital Temperature Controller 12v
0 out of 5(0)This STC-3000 Temperature Controller includes a NTC 10K sensor and is designed to be used for heating and cooling. It is an excellent and convenient multifunction device for controlling temperature in Aquariums. The two 10 amp switched outputs can be connected to heaters, fans, and cooling system. The controller has a large LED display and easy to program.
SKU: n/a







There are no reviews yet.