-
-
Egg incubators, Environmental Sensors, Incubators and Hatchery Equipment, Temperature & Humidity Sensors, Temperature and humidity sensors
AC 220V STC-3028 Digital Temperature Controller STC3028
Egg incubators, Environmental Sensors, Incubators and Hatchery Equipment, Temperature & Humidity Sensors, Temperature and humidity sensorsAC 220V STC-3028 Digital Temperature Controller STC3028
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control.
Supporting Temp and Humidity Calibration
Dual Display Window,Be able to display measured temperature/humidity and set temp/humidity at the same time
SKU: n/a
24V Ultrasonic Mist Maker Air Humidifier
$12.60
A 24V Ultrasonic Mist Maker is a device that generates cool mist using ultrasonic vibrations. When placed in water and powered, it creates fine water droplets (mist) without heating widely.
$12.60
A 24V Ultrasonic Mist Maker is a device that generates cool mist using ultrasonic vibrations. When placed in water and powered, it creates fine water droplets (mist) without heating. It’s widely used in:
-
Incubators (to maintain humidity)
-
Humidifiers
-
Hydroponic systems
-
Reptile terrariums
-
Aromatherapy or decorative fog setups.
Key Features
-
Cool mist without heat — safe for eggs, plants, animals
-
Quiet operation (ultrasonic)
-
Rapid humidity increase
-
Easy to clean and install
-
Low voltage = energy efficient and safer
-
Compatible with automatic controllers like XM-18D, STC-3028.
- High-quality Products
- No heat or chemicals used
- Easy to operate, long service life, self-protection
- perfect for indoor or outdoor fountains, water feature, and office use
- Add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology.
Installation & Usage
What You Need:
-
A 24V DC power supply (with current rating matching the mist maker — usually 1A–2A)
-
A container of clean water
-
A fan (optional but recommended to spread the mist)
-
Humidistat/thermostat for auto control (optional)
Steps:
-
Place the mist maker flat inside a container with clean water.
-
Water depth should cover the sensor by about 1.5–2 cm.
-
Plug the mist maker into a 24V DC power adapter.
-
The mist will begin to rise as soon as it’s powered.
-
If using in an incubator, add a small fan to distribute humidity.
Safety & Maintenance Tips
-
Use clean, non-hard water to avoid mineral buildup.
-
Clean the disc gently with a cotton swab every few days.
-
Don’t run it dry — it may overheat or get damaged.
-
Place it on a non-conductive platform in water (many models come with floats).
-
Use with a humidity controller to avoid over-humidification.
-
Works best in closed environments like incubators or terrariums.
Using with Controllers (Optional)
You can connect it to humidity controllers like:
-
XM-18D
-
STC-3028
Example setup:
-
Plug the mist maker’s power supply into the “Humidifier” relay output.
-
Set your desired humidity (e.g., 60% RH).
-
The controller will turn the mist maker on/off automatically.
7. Package May Include
-
1× Ultrasonic mist maker head
-
1× Float ring or holder
-
a 24V power adapter
Specification:
- Color: silver
- Material: Alloy + Electronic Components
- Voltage: 24Vdc, 1000mA
- Power: 19W
- Mist Diameter: about 16mm
- Mist Height: about 33mm
- Cable length: about 130cm
- Weight:0.2kg
- Operation temperature: 5-45 degree.
- LED light color: red,blue,green
- Mist outlet capacity:Greater than 350ML/H
- The best water level:50-70mm
- DC connector terminal size:5.5mm*2.1mm
- USE:Household,pool,,aquarium
- Only the above package content, other products are not included.
- Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related Products
Related products
-
Distance and Proximity Sensors, Sensors, Ultrasonic Sensors, Uncategorized
HC-SR04 Ultrasonic Sensor
0 out of 5(0)HC-SR04 Ultrasonic is a sensor that uses sonar to determine to determine the distance to an object like bats too. It offers excellent non-contact range detection with high accuracy and stable readings in an easy to use package, it comes complete with ultrasonic transmitter and receiver modules.
SKU: n/a
Related products
-
Uncategorized
ESP8266 NodeMCU V3 Wireless module with USB cable
0 out of 5(0)NodeMCU is an open source firmware used to develop a prototype or build IoT devices That firmware is based on the ESP8266 WIFI SoC from Espressif systems and Hardware ESP-12 module. It use the Lua scripting language. NodeMCU is on the eLua project and built on Espressif Non-OS SDK for ESP8266
SKU: n/a








There are no reviews yet.